Isophthalic Polyester Resin reinforced with chopped glass fibres and surfacing tissue.
This product is pre-cured and shaped FRP (Fibre Reinforced Polyester). Straight sections are 950mm long and have a complimentary overlap that is appropriate to the pipe and insulation diameter. A full range of moulded elbows, tees, end caps and fittings are available from 2” to 48”.
FibaClad uses FibaBond as an adhesive. FibaBond is an elastomeric polymer sealant with high adhesive properties.
This system has been developed for its fire performance, M1 NFP92-501 Epiradiateur Test, BS476 Part 6 Class O, Part 7 Class 1, ASTM E84 Class A, ASTM D635 (HB) RINA and its low smoke evolution on burning with no harmful gas levels as defined by the International Maritime Organization Resolution MSC 61 (67) 1996. Tests carried out by Warrington Fire Research and Intertek Group (Texas).
Type approval by Lloyds (No. SAS F110227) and RINA (No. MAC343110CS/001)
All other fittings are available
Features & Benefits
CHANGE BULLET TITLE TO FIBACLAD COMPONENTS
Fibaclad Bends (90 degree bends are made as 1.5d radius bends unless otherwise requested)
45 Degree bends
Fibaclad 90 Elbows
Fibaclad End Caps
Fibaclad Blanking Cap Ends
Fibaclad Flange Boxes (Various fastening systems available, advise on enquiry)